添加收藏
首页 » 乐器库 » Tube-Tech » Tube-Tech MEC 1A Recording Channel

Tube-Tech MEC 1A Recording Channel

价格: $4400.00 (约合人民币 ¥32120) (注:此价格为美国市场参考价格,非本站出售价格,本站正在积极搭建代购渠道!)

  • 浏览:147次
  • 品牌:Tube-Tech
  • 状况:全新
  • 类别:现场音响 - 信号处理 - Mic Pre-Amps
  • 一句话简介:One-channel combining Tube-Tech's all-tube preamp, EQ, and compressor gives you a polished professional sound effortlessly.
  • 简介:The rackmount Tube-Tech MEC 1A recording channel combines the MP 1A microphone and DI preamplifier, EQ 1A equalizer, and CL 1B optical compressor. It doesn't get any better than that baby! The MEC 1A is designed and hand crafted to deliver the warmth of vintage quality recordings with unrivaled accuracy, purity, and realism. You couldn't ask for a better front end for your DAW!

    Tube-Tech MEC 1A Recording Channel, First Take:
    • All-tube channel strip comprising MP 1A preamp, EQ 1A equalizer, and CL 1B compressor

      Microphone preamp:
      The microphone preamplifier consists of a microphone input transformer (with a static screen) with a step-up of +10 dB, two dual tube preamplifiers with two stepped gain switches, one with 10dB/step (coarse) and one 1dB/step (fine) giving a total gain range of +20dB to +70dB. The microphone input is provided with a switchable -20dB attenuation (PAD), switchable +48 V phantom-power and phase reverse. A highpass filter for the microphone and the DI input is switchable between off, 20 Hz and 40 Hz. For more information, check out the Tube-Tech MP 1A (# 182001)

      The microphone input is capable of accepting levels of up to +6 dBU (1.55V) at 40 Hz without the PAD. With the PAD switched into the circuit, the MEC 1A can be used as a unity gain line amplifier accepting levels up to +26 dBU (15.5V) at 40 Hz. The high impedance DI input is unbalanced and placed in the circuit directly after the input transformer. The gain range for this input is +10dB to +60dB. When in use, the microphone input is disabled.

      Equalizer:
      You'll love the sound of this EQ. It performs exactly as you would want a high-end EQ to. With minimal tweaking, you can add all of the punch, polish, and air you like to make your recordings stand out. The equalizer features low and high shelving filter with a gain range of +/- 15dB, each with 6 switchable frequencies and a band filter with a gain range of +/- 20dB, 12 switchable frequencies and a bandwidth control. The shelving and the bell filters are designed around a dual tube operational amplifier. The equalizer has a separate in/out switch. For more information, check out the Tube-Tech EQ 1A (# 182019)

      Compressor:
      The compressor is the same type optocompressor found the the Tube-Tech CL 1B, the vocal compressor of choice for so many top producers and engineers. It has controls for ratio, threshold, attack and release. A switch selects between manual attack and release and fixed attack and release. With the link switch it is possible to link several units together on two independent bi- directional buses. The compressor has a separate in /out switch. In normal operation the equalizer is in front of the compressor, but a switch enables the compressor to be in front of the equalizer. For more information, check out the Tube-Tech CL 1B (# 182025)

      About Tube-Tech
      For over twenty years, Tube Tech has been one of the most prominent names in all-tube signal processing equipment. You'll find their gear in the best recording and mastering studios around the world. The company's founder, John Petersen is an electrical engineer who was factory trained at Solid State Logic, EMT, Studer, Sony, Neumann, and NTP Electonik (digital audio routers). He also designed tape recorder playback/recording amps for Lyrec tape recorders (found in the studios of the legendary Joe Meek and Vangelis). His first design under the name of Tube-Tech was an all-tube equalizer based on the legendary Pultec EQP 1A. Petersen continued to design and manufacture a number of innovative all-tube outboard processors including preamps, multiband compressors and summing amps. Thanks to John's dedication to high-quality analog sound you'll see Tube-Tech gear in the racks of pro audio legends such as multi Grammy Award winner Al Schmitt, (Frank Sinatra, Steely Dan, Toto, Quincy Jones, Natalie Cole, Diana Krall), Grammy winner Joe Chiccarelli, (Elton John, Beck, U2, Tori Amos, Counting Crows, Offspring), engineer Russ Long (Sixpence None The Richer, Wilco, Dolly Parton, Allison Moorer), producer-engineer Tony Shepperd (Elton John, Madonna, Kenny Loggins, Barbra Streisand, Lionel Richie, and Whitney Houston), and many more.

    • 技术参数:
      1. Tube based "All-in-one" recording channel
      2. +20 dB to +70 dB Gain mic preamp
      3. Phantom Power (+48 V)
      4. Phase Reverse
      5. -20 dB pad
      6. Lowcut filter
      7. High-impedance DI-input (>1 Mohm) for direct connection of guitar, bass or keyboard
      8. Three band equalizer
      9. 6 Low shelving frequency choices
      10. 6 High shelving frequency choices
      11. Bell type Mid section with 12 switchable frequencies
      12. Variable Q
      13. Separate in/out switch
      14. Compressor with optical gain reduction element
      15. Linkable for stereo applications
      16. Variable Attack and Release parameters
      17. Ratio 1.5: 1 to 10
      18. Separate in/out switch

    乐器评论:


    发表评论前,请先登录点此注册)!

    上传图片: 描述:

同类别其他产品:


    Warning: mysql_fetch_array(): supplied argument is not a valid MySQL result resource in /opt/lsxiong/site9/product.php on line 331